Primary Seeding Boot Selection & Residue Deflectors

Seeding boot selection

ST-RFB-32

ST-RFB

STANDARD FLEXI BOOT 32mm ID c/w SS Hose Clamp

Warranty Note -All rubber flexi-boots must have the delivery hose ( or quality substitute nylon hose) fully inserted into the boot for long life and accurate seed placement.

 

 

 

st-rfb-lm

ST-RFB-LM

LOW-MOUNT FLEXI BOOT 32mmI/D c/w SS Hose Clamp

Hose mounts lower to match long points and avoid bracket damage on breakout.

Warranty Note -All rubber flexi-boots must have the delivery hose ( or quality substitute nylon hose) fully inserted into the boot for long life and accurate seed placement.

ST-RFBTAIL-45

ST-RFBTAIL-45

STRAIGHT TAIL (45mm long)

32mm OD to suit ST-RFB and ST-RFB-LM

Has hardfacing applied to vertical edges to reduce wear

 

ST-RFBTAIL-C

ST-RFBTAIL-C

CURVED TAIL

32mm OD to suit ST-RFB and ST-RFB-LM

Has hardfacing applied to vertical edges to reduce wear

ST-LRB-38

ST-LRB

LARGE FLEXI BOOT 38mm ID c/w SS Hose Clamp

Warranty Note -All rubber flexi-boots must have the delivery hose ( or quality substitute nylon hose) fully inserted into the boot for long life and accurate seed placement.

st-rfb-lm

ST-LRB-LM

LARGE LOW-MOUNT FLEXI BOOT 38mmI/D c/w SS Hose Clamp

Hose mounts lower to match long points and avoid bracket damage on breakout.

Warranty Note -All rubber flexi-boots must have the delivery hose ( or quality substitute nylon hose) fully inserted into the boot for long life and accurate seed placement.

ST-RFBTAIL-45

ST-LRBTAIL-45

STRAIGHT TAIL (45mm long)

38mm OD to suit ST-LRB and ST-LRB-LM

Has hardfacing applied to vertical edges to reduce wear

p-st-lrbtl-25

P-ST-LRBTL-25

STRAIGHT TAIL 25mm wide tail

38mm OD to suit Primary Tine P-ST-AALRB

Has hardfacing applied to vertical edges to reduce wear

ST-RFBTAIL-C

ST-LRBTAIL-C

CURVED TAIL

38mm OD to suit ST-LRB and ST-LRB-LM

Has hardfacing applied to vertical edges to reduce wear

ST-LRBTAIL-Y

SPLITTER TAIL (65mm wide)

Not designed for use behind narrow points or in rocky conditions.

ST-ADJ

ST-ADJ

Steel height and angle adjustable seed boot range encompassing

  • ST-ADJ-132   32mn OD
  • ST-ADJ-135    our standard 35mm OD
  • ST-ADJ-138    38mm OD and
  • ST-ADJ-141     41mm OD

Note : For Clean conditions only

Requires a pair of ST-CL-50 Clips to Angle the tube back for shallow sowing

ST-CL-50

ST-CL-50

Connecting links to angle ST-ADJ boot rearwards ( 2 required per Boot and also require 2 x  1″ x 5/16″ UNC  Z/P Bolts and nyloc nuts)

Residue Deflectors or Trash Tubes

Many types and designs of Primary Sales residue deflectors (Trash Tubes) exist to aid broad-acre tines to more easily flow through existing stubble and trash whilst one pass seeding.

As we move further towards the retention of stubble/trash and weed control mechanization as a means of retaining moisture and reducing input costs the retained stubble and trash grows which with both tined and disc machines will roll under the frame with curved tines or build-up and crimp on the tines affecting seed placement.

trash tube
2006 P22-trash-tubes

For example

TT-FC-350

fits the “C” shank Flexicoil tine as illustrated

Performance of both edge-on and flat-on tines will be enhanced when fitted with residue deflectors. These deflectors aid residue flow through the implement by preventing straw being crimped around sharp edges of the tine. On most models the lower end of the deflector is cut to fit over the top end of the Primary Sales Points to eliminate another potential stubble trap. They are easily fitted and are zinc coated to improve their performance. Mounting bolts and nylocs are included.

Please advise your machine, tine model  (shape and strength)  and point type when ordering.