The Nylon Extension fingers clip onto the Adapt-A-Gap range of knife guards allowing compression of light crops when cutting as well as collection and feeding of stray grains and pods reducing crop losses.
This Video explains how the Adapt-A-Gap System works.
If your Harvester Fronts WORKING POSITION is NOSE DOWN then the Standard BLUE single Extension Finger is suitable as it is raised up at the nose so that when it is mounted on the Adapt-A-Gap knife guard it is parallel to the ground for the NOSE DOWN front when harvesting.
If your Harvester Fronts WORKING POSITION is PARALLEL to the Ground then the PINK single Extension Finger with the “-3” is suitable as it is horizontal or parallel to both the Adapt-A-Gap knife guard and the front.
4 Finger Guards for Light Crops
3 Finger Guards for Medium Crops / John Deere
2 Finger Guards for Heavy Crops
Pickup Fingers for Peas / Lentils or FE50W / FE65W for downed crops
Link to Knife Guards to Suit your Brand of Harvester Front
These Adapt-A-Gap four Finger knife guards are suitable from light crops of under 1.2 tonnes per Ha to the heavier crops of over 3 tonnes per Ha when using the Snap-On finger extensions.
Please contact us to see which knife guard will suit the dimensions of your knife and knife alignment – FB1, FB2 , FB3 or FB4 series knife guard (1.5″ centres)
21mm gap using platform extenders for SORGHUM LUPINS, SOYBEANS, CHICKPEAS, FABA Beans and SHATTER-PRONE-crops when used with FB series knife guards (1.5″ centres)
Very useful for combing up wind or hail damaged or tangled crops.
These platform extenders have an adjustable angle allowing the tip of the extender to be raised or lowered to suit your front and your crop conditions
13mm Gap Setting extensions for CEREALS 6 BAGS/ACRE 1.2 TONNES/Ha when used with FB series knife guards (1.5″ centres)
Fe13 is Blue, FE13-3 is Pink
15mm Gap Setting alternate FE 13 (FE 13-3) with FE 17 (FE 17-3) extensions for CEREALS 6 – 9 BAGS/ACRE 1.2 – 1.8 TONNES/Ha when used with FB series knife guards (1.5″ centres)
17mm Gap Setting FE 17 (FE 17-3) extensions for CEREALS 9 – 12 BAGS/ACRE
1.8 – 2.4 TONNES/Ha when used with FB series knife guards (1.5″ centres)
19mm Gap Setting alternate FE 17 (FE 17-3) with FE 21 (FE 21-3) extensions for CEREALS 12 – 15 BAGS/ACRE 2.4 – 3 TONNES/Ha when used with FB series knife guards (1.5″ centres)
21mm Gap Setting FE 21 (FE 21-3) extensions for CEREALS OVER 15 BAGS/ACRE 0VER 3 TONNES/Ha when used with FB series knife guards (1.5″ centres)
These Adapt-A-Gap Three Finger knife guards are suitable from light crops of under 1.2 tonnes per Ha to the heavier crops of over 3 tonnes per Ha when using the Snap-On finger extensions.
The bare knife guard has a 34mm gap.
Please contact us to see which knife guard will suit the dimensions of your knife and knife alignment – FG3, FG4 or FG5 series knife guard (2″ centres)
32mm Gap Setting FE 65W-A platform extenders on FG series (2″ centre) knife guards for SORGHUM, LUPINS SOYBEANS, CHICKPEAS, FABA Beans and SHATTER-PRONE-crops.
Very useful for combing up wind or hail damaged or tangled crops.
26mm Gap Setting FE 13 (FE 13-3) extensions for lighter crops when using FG series Knife Guards 10 – 13 BAGS/ACRE
21mm Gap Setting FE 30W (FE 30W-3) extensions for lighter crops when using FG series Knife Guards 7 – 10 BAGS/ACRE
These Adapt-A-Gap two finger knife guards are suitable for all crop densities especially medium to heavy crops and can utilise the FE95W metal sorghum finger or any of the plastic extension fingers such as the FE13, FE30W and Fe-Pickup ranges. (3″ centres)
FE-95W steel platform extender for the FD40 2 finger series of Knife Guards
Ideal for enhancing recovery of Lupins or Sorghum.
42mm Gap Setting for 2 Finger Knife Guards in Lighter Crops (3″ centres)
57mm Gap Setting for bare 2 – finger knife guard (3″ centres) for ALL Crops.
Plastic fingers extensions to suit Adapt-A-Gap Knife Guard System
For pickup of Lentils, Peas and other ground hugging crops
Can be one per finger or spaced every 2nd or third finger to any one of our Adapt-A-Gap knife guard series.
This light duty lifter is designed to pickup down or lodged crop and can be fitted to any of our Adapt-A-gap knife guard series.
Our single Finger Extensions have codes such as FE21 (narrow) FE17, FE13 (wider) and FE30W(widest) as displayed above.
The standard angle in Blue and raised at the nose whilst the horizontal fingers are Pink and have a “-3” in the code e.g. FE13-3.
Head Office: (08) 9250 3500
Eastern Office: (08) 9250 3500
South Australian Office: (08) 9250 3500
Facebook