Primary Sales “Adapt-A-Gap” Crop Finger System for JOHN DEERE

 

Light to Medium Crops require 3 Finger Knife Guards

Our Primary Sales Adapt-A-Gap System gives you benefits in your light to Medium crops with Replaceable Wear strips and optional finger extensions, Vibramats   Vibra-Mat or Cutterbar lift kits Cutter Bar Lift Kits

Please refer to our resources download pages for fitting instructions or assembly drawings.   Download

 

JOHN DEERE Rigid Front  600X Series Dual Knife

Use FG-5 Knife Guards (3 finger) plus Drive End Guards, wear strips and spacers. These are a NEW EUROPEAN BUILD supplied with SCHUMACHER GUARDS. (Non standard mounting hole spacing.) POA for Lift Kits.

35 Ft John Deere 635X Dual Knife Front

35 Ft John Deere  635X Rigid Front Dual Knife

Knife Guard Requirements and options

68 x FG-5 knife guards, 1 x FG-5-R end Guard, 3 x  FS-JD600X-02, 32 x FS-JD600X-04, 1 x FS-JD600X-CSP, 31 x F-HDCLP-JD600X, 4 x LHAHDCLP and has options of Cereal Extensions FE 13/17/21/30W plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool.

Read More about Extensions and Guards

40 Ft John Deere 640X Dual Knife Front

40 Ft John Deere  640X Rigid Front Dual Knife

Knife Guard Requirements and options

78 x FG-5 knife guards, 1 x FG-5-R end Guard, 3 x  FS-JD600X-02, 32 x FS-JD600X-04, 1 x FS-JD600X-CSP, 31 x F-HDCLP-JD600X, 4 x LHAHDCLP and has options of Cereal Extensions FE 13/17/21/30W plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool.

Read More about Extensions and Guards

35 Ft John Deere 635X Dual Knife Front

Knife Guard Requirements and options 68 x FG-5 knife guards, 1 x FG-5-R end Guard, 3 x  FS-JD600X-02, 32 x FS-JD600X-04, 1 x FS-JD600X-CSP, 31 x F-HDCLP-JD600X, 4 x LHAHDCLP and has options of Cereal Extensions FE 13/17/21/30W plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More

35Ft

View

40 Ft John Deere 635X Dual Knife Front

Knife Guard Requirements and options 78 x FG-5 knife guards, 1 x FG-5-R end Guard, 3 x  FS-JD600X-02, 32 x FS-JD600X-04, 1 x FS-JD600X-CSP, 31 x F-HDCLP-JD600X, 4 x LHAHDCLP and has options of Cereal Extensions FE 13/17/21/30W plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More

40Ft

View

JOHN DEERE Draper Fronts, 900 Series JOHN DEERE Rigid Platforms, 600R Series* and 600F Hydra-Flex (US Build)

Use FG-3JD-TM Knife Guards (3 finger) and using existing non drive end guard.

Vibramats work well on the 600 rigid platforms with the stone guard removed. (Require 3mm shims under the hold downs when stone guard is removed)

FB-3-JD (4 finger) knife guards are also suitable, However replacement knife sections , hold downs and an exchange re-drilled knife head  would be required.

22 Ft John Deere (600 Series only)

22 Ft John Deere 600 Series

Knife Guard Requirements and options

44 x FG-3JD-TM knife guards plus re-use existing non drive end guard and has options of Cereal Extensions FE 13/17/21 and FE30W/30W-3  plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More about Extensions and Guards

25 Ft John Deere Draper, 900 Series, 600 Series & 600F

25 Ft John Deere Draper, 900 Series, 600 Series & 600F

Knife Guard Requirements and options

50 x FG-3JD-TM knife guards plus re-use existing non drive end guard and has options of Cereal Extensions FE 13/17/21 and FE30W/30W-3  plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More about Extensions and Guards

30 Ft John Deere Draper, 900 Series, 600 Series & 600F

30 Ft John Deere Draper, 900 Series, 600 Series & 600F

Knife Guard Requirements and options

60 x FG-3JD-TM knife guards plus re-use existing non drive end guard and has options of Cereal Extensions FE 13/17/21 and FE30W/30W-3  plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More about Extensions and Guards

36 Ft John Deere Draper, 900 Series, 600 Series & 600F

36 Ft John Deere Draper, 900 Series, 600 Series & 600F

Knife Guard Requirements and options

72 x FG-3JD-TM knife guards plus re-use existing non drive end guard and has options of Cereal Extensions FE 13/17/21 and FE30W/30W-3  plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More about Extensions and Guards

22 Ft John Deere (600 Series only)

Knife Guard Requirements and options 44 x FG-3JD-TM knife guards plus re-use existing non drive end guard and has options of Cereal Extensions FE 13/17/21 and FE30W/30W-3  plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More

22Ft

View

25 Ft John Deere (600 Series only)

Knife Guard Requirements and options 50 x FG-3JD-TM knife guards plus re-use existing non drive end guard and has options of Cereal Extensions FE 13/17/21 and FE30W/30W-3  plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More

25Ft

View

30 Ft John Deere (600 Series only)

Knife Guard Requirements and options 60 x FG-3JD-TM knife guards plus re-use existing non drive end guard and has options of Cereal Extensions FE 13/17/21 and FE30W/30W-3  plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More

30Ft

View

36 Ft John Deere (600 Series only)

Knife Guard Requirements and options 72 x FG-3JD-TM knife guards plus re-use existing non drive end guard and has options of Cereal Extensions FE 13/17/21 and FE30W/30W-3  plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More

36Ft

View

JOHN DEERE Draper Fronts, 600D and 700D Series ( both Dual Knives)

Use FG-3JD-TM Knife Guards (3 finger) are a direct fit.

A lift Kit is strongly recommended.    Cutter Bar Lift Kit

35 Ft John Deere 635D and 735D Draper

35 Ft John Deere 635D and 735D Draper

Knife Guard Requirements and options

64 x FG-3JD-TM knife guards, 2 x FG-3-JD-KH, 1 x FG-3JD-KH-LH, 1 x FG-3JD-KH-RH end Guards, 2 x FG-3JD-KOC Centre guards and has options of Cereal Extensions FE 13/17/21 and FE30W/30W-3  plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More about Extensions and Guards

40 Ft John Deere 640D and 740D Draper

40 Ft John Deere 640D and 740D Draper

Knife Guard Requirements and options

74 x FG-3JD-TM knife guards, 2 x FG-3-JD-KH, 1 x FG-3JD-KH-LH, 1 x FG-3JD-KH-RH end Guards, 2 x FG-3JD-KOC Centre guards and has options of Cereal Extensions FE 13/17/21 and FE30W/30W-3  plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More about Extensions and Guards

35 Ft John Deere 635D and 735D Draper

Knife Guard Requirements and options 64 x FG-3JD-TM knife guards, 2 x FG-3-JD-KH, 1 x FG-3JD-KH-LH, 1 x FG-3JD-KH-RH end Guards, 2 x FG-3JD-KOC Centre guards and has options of Cereal Extensions FE 13/17/21 and FE30W/30W-3  plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More

35Ft

View

40 Ft John Deere 635D and 735D Draper

Knife Guard Requirements and options 74 x FG-3JD-TM knife guards, 2 x FG-3-JD-KH, 1 x FG-3JD-KH-LH, 1 x FG-3JD-KH-RH end Guards, 2 x FG-3JD-KOC Centre guards and has options of Cereal Extensions FE 13/17/21 and FE30W/30W-3  plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool

Read More

40Ft

View

JOHN DEERE Rigid Platforms, 200 and 900* Series

Use FB-3 Knife Guards (4 finger).

Vibramats work well on these fronts particularly when fitted with Adapt-A-Gap system.  Vibra-Mat

  • 900 Series require high-arch hold-down clips , one per foot part number LHAHDCLP.

24 Ft John Deere 200 and 900 Series Rigid Platforms

 24 Ft John Deere 200 and 900 Series Rigid Platforms

Knife Guard Requirements and options

47 x FB-3 knife guards plus 1 X FB-35-5 drive end guard and has options of Cereal Extensions FE 13/17/21 plus fitting tool and Platform Extender Fingers FE-50W-A plus fitting tool

Read More about Extensions and Guards

30 Ft John Deere 200 and 900 Series Rigid Platforms

 30 Ft John Deere 200 and 900 Series Rigid Platforms

Knife Guard Requirements and options

59 x FB-3 knife guards plus 1 X FB-35-5 drive end guard and has options of Cereal Extensions FE 13/17/21 plus fitting tool and Platform Extender Fingers FE-50W-A plus fitting tool

Read More about Vibramats

36 Ft John Deere 200 and 900 Series Rigid Platforms

 36 Ft John Deere 200 and 900 Series Rigid Platforms

Knife Guard Requirements and options

71 x FB-3 knife guards plus 1 X FB-35-5 drive end guard and has options of Cereal Extensions FE 13/17/21 plus fitting tool and Platform Extender Fingers FE-50W-A plus fitting tool

Read More about Extensions and Guards

24 Ft John Deere 200 and 900 Series Rigid Platforms

Knife Guard Requirements and options 47 x FB-3 knife guards plus 1 X FB-35-5 drive end guard and has options of Cereal Extensions FE 13/17/21 plus fitting tool and Platform Extender Fingers FE-50W-A plus fitting tool

Read More

24Ft

View

30 Ft John Deere 200 and 900 Series Rigid Platforms

Knife Guard Requirements and options 59 x FB-3 knife guards plus 1 X FB-35-5 drive end guard and has options of Cereal Extensions FE 13/17/21 plus fitting tool and Platform Extender Fingers FE-50W-A plus fitting tool

Read More

30Ft

View

36 Ft John Deere 200 and 900 Series Rigid Platforms

Knife Guard Requirements and options 71 x FB-3 knife guards plus 1 X FB-35-5 drive end guard and has options of Cereal Extensions FE 13/17/21 plus fitting tool and Platform Extender Fingers FE-50W-A plus fitting tool

Read More

36Ft

View

JOHN DEERE FLEX FRONTS 930F ( 30 Ft indicated, other sizes P.O.A.)

Use FB-3 Knife Guards (4 finger).

Vibramats are suitable for this front particularly when fitted with Adapt-A-Gap system.   Vibra-Mat

30 Ft John Deere 930F Flex Front

 30 Ft John Deere 930F Flex Front

Knife Guard Requirements and options

37 x FB-3 knife guards, 19 x FB-3-JDFF (at skid plate supports), 1 x FB-32-3 drive end guard, 3 x FB-37-6 (to replace 3 finger binder guards) and has options of Cereal Extensions FE 13/17/21 plus fitting tool and Platform Extender Fingers FE-50W-A plus fitting tool

Read More about Vibramats

30 Ft John Deere 930F Flex Front

Knife Guard Requirements and options 37 x FB-3 knife guards, 19 x FB-3-JDFF (at skid plate supports), 1 x FB-32-3 drive end guard, 3 x FB-37-6 (to replace 3 finger binder guards) and has options of Cereal Extensions FE 13/17/21 plus fitting tool and Platform Extender Fingers FE-50W-A plus fitting tool

Read More

30Ft

View

JOHN DEERE Rigid Front  600R Series

Use FG-5 Knife Guards (3 finger) plus Drive End Guard, Hold-downs,  wear strips and spacers.

These are a NEW EUROPEAN BUILD supplied with SCHUMACHER GUARDS. (Non standard mounting hole spacing.)

3o Ft John Deere 630R Rigid Front

3o Ft John Deere 630R Rigid Front

Knife Guard Requirements and options

62 x FG-5 knife guards, 1 x FG-5-R end Guard, 30 x  FS-JD600R-04, 30 x F-HDCLP-JD600X, 1 x LHAHDCLP, 2 x FS-JD600R-KHS, 30 x FS1x25 and has options of Cereal Extensions FE 13/17/21/30W plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool.  NOTE : _Requires Genuine Knife Head ( JDPN AXE35145 – suits JD635R)

Read More about Extensions and Guards

35 Ft John Deere 635R Rigid Front

35 Ft John Deere 635R Rigid Front

Knife Guard Requirements and options

72 x FG-5 knife guards, 1 x FG-5-R end Guard, 35 x  FS-JD600R-04, 35 x F-HDCLP-JD600X, 1 x LHAHDCLP, 2 x FS-JD600R-KHS, 36 x FS1x25 and has options of Cereal Extensions FE 13/17/21/30W plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool.

Read More about Extensions and Guards

30 Ft John Deere 630R Rigid Front

Knife Guard Requirements and options 62 x FG-5 knife guards, 1 x FG-5-R end Guard, 30 x  FS-JD600R-04, 30 x F-HDCLP-JD600X, 1 x LHAHDCLP, 2 x FS-JD600R-KHS, 30 x FS1x25 and has options of Cereal Extensions FE 13/17/21/30W plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool.  NOTE : _Requires Genuine Knife Head ( JDPN AXE35145 - suits JD635R)

Read More

30Ft

View

35 Ft John Deere 630R Rigid Front

Knife Guard Requirements and options 72 x FG-5 knife guards, 1 x FG-5-R end Guard, 30 x  FS-JD600R-04, 30 x F-HDCLP-JD600X, 1 x LHAHDCLP, 2 x FS-JD600R-KHS, 30 x FS1x25 and has options of Cereal Extensions FE 13/17/21/30W plus fitting tool and Platform Extender Fingers FE-65W plus fitting tool.  NOTE : _Requires Genuine Knife Head ( JDPN AXE35145 - suits JD635R)

Read More

35Ft

View