Scarifiers and Pasture Renovation

      Jump to Pasture Renovation

 

Scarifiers Tines with one ½” bolt hole

pr11-t

PR-11-T

2 ½” Ripper T.C. tipped

Requires: One 2/14 x 1/2 G8 Bolt & Nylocs (includes extra length for fitting boots) torque setting 82nm, 60 LBFT.

PR13-T

PR-13-T

7” Sweep T.C. tipped

Hardware: One 2/14 x 1/2 G8 Bolt & Nylocs (includes extra length for fitting boots) torque setting 82nm, 60 LBFT.

PR14-T

PR-14-T

8” Low-profile sweep T.C. tipped

Hardware: One 2/14 x 1/2 G8 Bolt & Nylocs (includes extra length for fitting boots) torque setting 82nm, 60 LBFT.

ST-SBEO-4

ST-SBEO-2

SINGLE SHOOT BRACKET to allow fitment of rubber flexi boot and tail

Requires a suitable ST-CB tine clip and 1″ x 5/16″ UNC Z/P bolt and nyloc

PASTURE Renovation

pr93

PR-93-TW

“Baker” T-Boot with tungsten carbide on leading edge and wing. (60mm bolt centres)

Use two 1 1/2″ x 5/16″ UNC G5 z/p bolt and nylocs for Connor Shea Coil Tine coulter Drill

Use two M10 x 30 G8.8 Z/P bolts and nylocs for Agro Drill or Duncan Drill and two 1 3/4″ x 5/16″UNC  G5 Bolt and Nyloc for Aitchison (NZ) Drill.

pr92

PR-92M-TW

Mini T-Boot with tungsten carbide on leading edge and wings. (32mm bolt centres)

Use two 1″ x 5/16″ UNC G5 z/p bolt and nylocs for Begg, Shearer Tine Drill, Sod Seeder coulter Tine Drill, Trash Culti Drill, all other machines converted with “Caldow” tine adaptors. Note: 2003 Model adaptors may have 3/8″ boltholes.

PR-91

PR-91

20mm wide Knife point with Tungsten Carbide on leading edge.

Lucerne type point for pasture renovation and minimised disturbance of the soil.

Use one 2 1/2 x 7/16 G8 Bolt and Nylcos.

PR-94-TW

PR 94-TW

Super Seeder 50mm wing with tungsten carbide leading edge and underside of wing.

Agronomic benefits of an Inverted-T seedbed with minimum disturbance and precise seed placement.

Use one 2 1/2 x 7/16 G8 Bolt and Nylocs.

pr94

PR-94

With tungsten carbide leading edge only

Agronomic benefits of an Inverted-T seedbed in low abrasive soils with minimum disturbance and precise seed placement.